NUTATING INLET ROTEX introduces new long life, dust-tight nutating inlet connector. Our nutating inlets significantly reduce maintenance downtime and improve housekeeping. The unique, patented design consists of a stainless steel cone suspended between two horizontal flexible diaphragms. The diaphragms are located outside the product stream resulting in significantly longer life than molded or fabric sleeves. Eventual failure is gradual and detectable, without product spillage, allowing replacement to be scheduled at a convenient time.The nutating inlet connector provides other performance advantages including:

• Typical service intervals of 6 months or more
  
• No material spillage when connector fails.
  
• Dust tight operation.
  
• Retrofittable on existing ROTEX® Screeners.
  
• Easy disassembly when required for access into screener.
  
• Handles up to 50 cfm (1.4 m3m) of feed.
  
• Suitable for materials with temperatures of up to 200°F/93°C.
  
• Also applicable to other types of vibratory equipment.

Nutating Inlets 97K PDF

SLIDING INLET/OUTLET CONNECTORS The sliding inlet virtually eliminates the regular replacement of your flexible connecting sleeves, and will not crack or split because the sleeve is stationary.

The long life, sliding inlet connector was developed by ROTEX to reduce downtime. The sliding inlet virtually eliminates the regular replacement of your flexible connecting sleeves, and will not crack or split because the sleeve is stationary.

• Long Life: Wear ring and disk will last for years.
  
• Reduces Downtime: Flexible connecting sleeve is stationary, protected by a wear cone and will not fatigue.
  
• Eliminates Leakage: Connecting sleeve will not tear or fatigue as fast as conventional sleeves subjected to continuous flexing.
  
• Indicates Wear: A horizontal wear groove shows when to replace the UHMW or Teflon® wear ring.

Sliding Inlet Connectors 60K PDF